Common terms for post printing processing

2022-08-21
  • Detail

Post press processing common term

paste: arrange the printing sheets according to the number, and the electro-hydraulic servo change fatigue testing machine is mainly composed of the host (including servo swing actuator), constant pressure servo pump station, relay energy storage and oil filtering module, full digital single channel servo controller DTC 200s, supporting experimental software and other accessories, which are folded into a stack of multiple pages

subscription: refers to the position of the part of the book that should be subscribed

front opening: also known as opening, refers to the reading edge opposite to the folding edge of the set opening

Tiantou: the blank from the top line of the book body to the top edge of the page

anchor: the space from the bottom line of the text of the book to the bottom edge of the page

book back: also known as the back, refers to the flush part of the book that needs to be attached (or bound) after the book is attached. There are round and square backs on the back of hardcover books

title page: a single page with the title of the book, the name of the publisher and the name of the author printed under the lining paper. Some books and periodicals print the lining paper and the title page together and bind them (i.e. bobbin pages), which is called the title lining

Folio: folio is a large format book bound into a volume

cover: also known as cover, outer cover, leather, book cover, etc. (Hardcover is called book case). The cover is wrapped outside the book block, which can protect the book block and decorate books. The cover is divided into two parts: the front cover (cover) and the inside (inside the cover), the first and second covers (front cover), and the third and fourth covers (back cover)

breach: the cut of the book page is damaged after the book block is cut

gluing: the part glued on the book post when the book post is glued with scattered pages. Usually take the last folded crease line as the reference line, and apply glue at the edge of the book according to a certain width

Saw Edge: use a saw blade to cut grooves with a certain depth, width and spacing on the back of the book in the vertical direction with the back of the book, so as to facilitate the adhesion of the adhesive to the page

crease line: the folding line of printed pages during folding processing

back milling: a process in which the back of the book block is milled or milled into a groove shape with a milling cutter or saw knife to facilitate the penetration of glue

knife marks: uneven knife marks appear on the incision

small pages: pages smaller than the cutting size in the other posts of the book

shrink post: a book post with either side indented into the book block

post line: after manual sorting, the part of the back paper wider than the thickness of the book block. Or after the book is wrapped, the cover bulges at the connection between the back of the book and the cover or back cover, showing a ridge line

insert: one or more pages that need to be inserted in the book block due to the arrangement of chart layout in books and periodicals

white pages: due to printing accidents, one or both sides of the page are not imprinted

cover: a method of matching pages by covering one book post on the face (or inside) of another book post in order of page number, forming a book block of a book, and then covering the cover on the outermost side of the book block

folding: the working process of folding the printed sheets into books and periodicals in the order of page numbers

page matching: the working process of matching book posts or multiple loose printed pages into books according to the order of page numbers

cover: the wrapping paper covered on the cover or book cover is often used for exquisite books. At the same time, the company will be able to control the shrinkage of resin books and classic works

hot melt adhesive: it is an adhesive that is heated and melted for sizing and rapidly solidified at room temperature

cold glue: glue that does not need to be heated during sizing

Book waist: also known as the middle waist. It refers to the connecting part in the middle of the lower and lower Book sealing shells, that is, the middle position between the first and fourth seals

pitch diameter: refers to the distance between the two paperboards of the second and third envelopes in the book envelope

middle seam: refers to the two gaps between the medium diameter paperboard and the case paperboard

lip: a binding form in which the front edge of the cover of a paperback book is about mm wider than the front edge of the book block, and then the cover is folded inward along the cutting edge of the front edge of the book block

glazing: they also specially invite domestic professional plastic commodity buyers to purchase (or spray, print) a layer of colorless transparent paint on the surface of printed matter, which can protect and increase the gloss of printed matter after drying. This processing process is called glazing. Generally, the surface of printed matter such as book cover, illustration, wall calendar, trademark decoration, etc. should be polished

lamination: transparent plastic film is pasted to the surface of printed matter through hot pressing to protect and increase gloss

foil ironing: a processing process in which metal foil or pigment foil is transferred to the surface of printed matter or other objects by hot pressing. It is called foil ironing, commonly known as bronzing, and its purpose is to improve the decorative effect

indentation: use steel wire to press out traces or leave groove marks for bending on the paper by embossing

ring lining: the lining paper connecting the book block and the cover

rough book: three uncut book blocks

light book: a book block cut light on three sides

round back: a kind of hardcover. The back of the book is made into a certain arc

plug cloth: a special object pasted on the back of the hardcover book block, the crown and both ends of the foundation

book case: the cover of hardcover books

whole face: also known as comprehensive, the surface material of the book case is a whole piece

joint: also known as half face, the surface material of the book case is not a whole piece. Usually, the cover and back cover are made of one material, and the book waist is made of another material

round raking: the process of processing the back of the book block into a circular arc before putting the round spine hardcover book on the case

ridging: before the hardcover book is put on the case, tighten and compact the book block with a splint, and press a convex mark on the front and back sides of the book block close to the connecting edge of the line between the spine and the ring lining, so that the spine will bulge slightly outward

floating mouth: refers to the part where the book cover shell is larger than the cut of the book block after the hardcover books and periodicals are nested

flat lock: a sewing method in which the matched books are bound into book blocks by strings, and the yarn is arranged in rows between the books

cross lock: it is a kind of sewing method to bind the matched Book posts into book blocks with thread strings one by one, and the yarn is staggered between each book post

circular potential: the radian of the curved surface of the round back of hardcover books

square back: a kind of hardcover. The back of the book is straight and perpendicular to the cover and back cover

wrap corners: wrap a layer of leather or fabric on the two corners of the front opening of the book cover

Book groove: also known as book groove or groove, it refers to the groove pressed into the connecting part between the cover and back cover and the spine of the hardcover book after it is nested

stitch distance: in sewing (or sewing), the distance between two adjacent stitch positions on the same book post (or the same sewing opening)

number of stitches: the number of stitches in the sewing (or sewing) of books

false ridge: a kind of hardcover. The book block is not ridged, but through the special decorative processing of the book case, the appearance of the whole book is like a ridged hardcover book

split: during rounding and ridging, the two adjacent Book posts on the round back of the book block are split and separated

connection edge: the overlapping part of the book case with the connection surface is made of two surface materials

binding: the four sides of the surface material of the book case are folded back along the edge of the book case cardboard and wrapped and adhered to the cardboard

plug fold: when wrapping the four corners of the rounded book case, the surface material is several fan-shaped fold packs of equal size, which are adhered to the cardboard of the book case

set ironing: hot stamping on the same processing object for more than two times

gold rolling: the process of scalding and coloring with gold materials and special tools on the cuts of books, books and cards

Bobbin Paper: Kraft Liner glued into a barrel. They are respectively bonded with the back and case of the book block to strengthen the back of large format and thick hardcover books

flower dipping mouth: the processing of dipping and sticking a layer of various patterns on the cutting surface of the book

Copyright © 2011 JIN SHI