Teach you how to look at the selection of greasy m

2022-07-22
  • Detail

Maoni - plate thickness: the imported plate is basically about 2cm, and the domestic plate ranges from 1.4-1.8cm. The thickness varies, and its price is different. Therefore, the price of JS is different for plates of the same quality and color, so when you buy them, you should ask about the thickness. The processing accuracy of Maoni II is different. The processing accuracy of domestic plates is not good. The same

Maoni I

plate thickness: the imported plates are basically about 2cm, and the domestic ones range from 1.4-1.8cm. The thickness is different, and the price is different. Therefore, the price of JS for plates of the same quality and color is different, so when you buy them, you should ask about the thickness

the processing accuracy of Maoni II is different.

the processing accuracy of domestic plates is not good. Some of the same batch of plates are 1.5cm thick, some are 1.6cm thick, and there are deviations in length and width, which makes it more difficult for the installation of bricklayers. The reason for poor construction quality is that the equipment can't keep up. The worse the equipment, the lower its price

Maoni three polishing equipment

plates have a degree of polishing, some of which can reach 110 degrees, and some can only reach 70 degrees. Therefore, the polishing equipment is not good. The same plate has different degrees of polishing, and the effect looks different

Maoni four shoddy

the store sample is a first-class board, and it is indeed a second-class board for you, which is different from the color difference and processing accuracy

big five materials don't make money, small materials make money

big materials (big board, engineering board) are basically real price + loss, but the lost materials can be processed into lines, trims, etc., which are what they can make as much as possible

cat's greasy six is confused with the real

it is dyed into Sichuan Red with 663, and the price difference is 100 yuan/square. The identification of the dyeing board depends on the side of the board. If it is the same as the color of the board (in the case of unpolished), it is dyed. Generally, the undyed edges are white. The dyeing board looks more rigid and will fade over time

the production methods of Maoni 7 are different

marble lines are generally ground from raw materials, with high cost and good quality, but some JS are pasted with plates and then ground into lines, with poor concave convex feeling, but the price is much lower

greasy eight edging

edging requires good craftsmanship. Generally, it is done by the teacher of the stone factory. Some material merchants use small-scale grinding, with uneven results and different gloss. The cost is reduced. There are also water grinding and dry grinding. The water grinding quality is good, the dry grinding quality is poor, and the gloss is worse. JS smears oil on the dry grinding place, hoping to achieve the effect of water grinding and obtain higher profits

cat nine

the origin is different. Take Dahua green as an example. It is made in China, Taiwan and Greece, and the prices are different. The store looks like it is imported, but it is used for you. The domestic Dahua green is also made for you. The dark one is more expensive than the light one. Here is also a place to make trouble

tricky ten repair techniques

if there are defects on some boards, JS will use pencil to repair the color, waxing, and if there are slight cracks on some boards, JS will use marble glue and color to repair, so that the secondary boards can be sold at the price of the primary boards

太原癫痫医院

重庆男科医院

重庆癫痫医院

义乌男科医院

Copyright © 2011 JIN SHI